CLIMCO 123A
CLIMCO®123A
INCI: AcrylatesCopolymer
Physical Properties
The data is just forreference only based on CLIM lab testing
Item | Data |
Appearance | Milky emulsion |
Solid content (105℃, 2.0g,3h,%) | 30.0-32.0 |
pH value (25℃) | 5.0-6.0 |
Viscosity (1%solid water soln, M3V10,25℃, mPa .s) | 4,000-12,000 |
General Information
CLIMCO®123A is an excellent rheologicalmodifier and suspension stabilizer. CLIMCO®123A has the same performance as most Acrylates Copolymer when it is neutral.CLIMCO ®123A can give excellentsuspension stability and excellent thickening performance in transparentformula with high surfactant content. At the same time, CLIMCO® 123A can produce synergistic thickening effect with salt insurfactant system, so as to produce more effective suspension, stability and thickeningperformance. The advantage is that CLIMCO®123A can still maintain its excellent performance when the system is alkaline,so this product can be used for neutral pH value formula system and alkaline formulasystem.
Benefits
l ThepH value is applicable to various alkaline formulations.
l Mildlycross-linked acrylic acid (ester) copolymer, no jelly phenomenon in theformula, and good low-temperature fluidity.
l Excellentfor suspending silicone, zinc pyrithione, powder and other insoluble ingredientin shampoo.
l Providesstabilizing, thickening and co-emulsifying functions.
l Applicablefor transparent system.
l Workssynergistically with surfactant and salt.
l Enhancethe visual impact of pearling agent and improve the stability dramatically.
End Application
l Household cleaning and care products
l Shampoo, bath and other cleaningproducts
l Pearl shampoo and detergent
l General transparent products andtransparent suspension products
l Polymer containing silicone oilconditioner products
l Facial care products
l Soap based cleaning products
Formula guidelines
Dilute CLIMCO ®123A with water at 1:1, add it into the formula and stir it evenly, then add organic or inorganicalkali to adjust the pH of the formula, add other components in the formula,stir it evenly, and adjust the pH and viscosity to the required range.
Recommended dosage: 5-8%, more than 7%is recommended for the formulation of suspended particles.