CLIMCO®121
INCI:Polyacrylamide& C13-14 Isoparaffin & Laureth-7
TypicalProperties
The data is just for reference only based onCLIM lab testing
Item | Data |
Appearance | Milky white translucent liquid |
Solid Content (%) | 45.0-50.0 |
Emulsion Viscosity mPa·s /25℃ | 1,500~4,500 |
Viscosity (25℃, 2%water soln, mPa·s) | 60,000~90,000 |
Residual Acrylamide (mg/kg)max | 2.0 |
GeneralInformation:
CLIMCO®121 is liquid,ready-to-use rheology modifier, stabilizer, thickener and emulsifier. It swellsfast and allows you to create gel or cream immediately without neutralizationor heat, emulsifies all kinds of oils, disperses pigment and physicalsunscreen, makes the cream with soft, supple and shining textures.
Product Properties
l No need premix, heat or extra treatment, can beadded in any step of emulsifying.
l Applicable to all kinds of oils such as vegetableoil, polar and non-polar oil, without heating or other extra treatment.
l Stabilizing organic or inorganic pigment informula, thickening some formulas containing 40% alcohol, other organic solventand polylol.
l Can be used over a wide range of pH 3.5~11.5.
l No influence on viscosity after long-time highspeed shearing or under UV radiation.
Application：
l Cream, lotion, creamy gel
l Make-up foundation and sunscreen cream
l Formula containing polar solvent, alcohol andpolyol
l Formula containing silicone or AHA
l Hair treatment and hair styling products
Formula guidelines
Cold Process: Blend CLIMCO®121 with oilphase. Add them into water phase. Mix them until uniform.
Hot Process: Heat oil phase and water phaseseparately to 75-80℃. Add oil phase into water phasewhile mixing. Then add CLIMCO®121into the emulsion at 60 ℃ . Homogenize moderately for15-20 minutes.
Dosage:
Used solely: 2.0~5.0%.
Used with other emulsifier: 0.2~2.0%
Storage & Handling:
Standard Packing: 35kg/drum
Storage: Keep in cool, dry, ventilatedand lightless place.